GLOBALTEK® Stainless Steel 90 Degrees L-Shape Conveyor Line System - 4.5 Inches Width

The GlobalTek® Stainless Steel 90 Degrees L-Shape and 180 Degrees U-Shaped Conveyor Line System features a Made in USA Bodine motor and variable speed control. This conveyor is ideal to maximize space in a production line and adjust to corners. They are used for perpendicular product transfers without disturbing the flow and orientation.

Main Features

• Made in USA with 100% UL certified components
• Stainless steel frame
• Up to 200 ft/min
• Dual post stainless steel welded base (ideal for lighter and heavier loads)
• Adjustable leveling pads
• Transfer end plates for container transitioning
• Toolless adjustable rail brackets
• Low friction acetal (Delrin) tab belt
• Belt driven bottom mount motor with stainless steel cover
• UHMW lubricated chain track system
• Bodine DC drive

Technical Data

• Standard 24” radius curve
• Curve available right and left turn
• Straight sections length made to order
• Conveyor standard width: 4.5”
• Bodine dc motor, 3/8 hp, 83 rpm, 248 lb/in
• 115 volts / 1 ph / 60 hz
• Floor to belt height 35” to 40”
• Adjustable guide rail opening: 0” to 5/8” wider than belta
• Adjustable guide rail height: 0”-5”

Optional Features

• Hand pack station
• Dual guide rail
• 4” stainless steel guide rail
• Stainless steel chain, mattop belt, flexible belt
• Side transfer plate conveyor to conveyor
• Wash down motor and speed control
• X-proof motor and speed control
• Locking casters

Warranty

• 12 months (limited warranty)

**This item is a custom project. Components are in stock but project must go through engineering prior to assembly.**